________________________________________________________________________
CommPartners Connect Customer Premise Equipment Page 30 of 31
*****************************************
* Router Configuration Menu *
*****************************************
C. Configure Port IP Address
U. Unconfigure Port IP Address
M. Configure Port Max Transmission Unit
S. Add/Remove a Static Route
R. Enable/Disable RIP
V. Configure RIP Version by Port
P. Configure RIP Poisoned Reverse by Port
N. Configure DNS Client
H. Configure DHCP Client
L. Configure DHCP Relay
T. Configure Telnet Server Port
A. Configure IP QoS
F. Configure IP Filtering
Q. Configure IP Header Compression
B. Configure LAN IP Broadcast Destination
G. Configure Domain Name
I. Configure Host Name
J. Remove Host and Domain Names
D. Display Route Table
ESC to return to previous menu
->
• For Static IP assignment, type C to configure an IP for either the LAN (10/100BaseT
Eth) or WAN (T1/E1) port. In this example, the LAN port will be configured. Select
option 2 from the Available Interfaces menu.
• Type in the Connection ID to configure (Default ID is 0)
• Enter the static IP address and subnet mask to assign to the LAN port.
• Once completed, you will be taken back to the Router Configuration Menu shown
above. Select S to Add a Static Route.
• From the Router Modification Menu, select F to Add the Default Route
• Enter the Default Gateway address
• Save the configuration and press the ESC key until you reach the Main Menu.
• At the Main Menu, select R to Reset the System
• If you need to configure DHCP instead, select H from the Router Configuration Menu
to Configure the DHCP Client
• Select option 2 to configure the 10/100BaseT Ethernet (LAN) port for DHCP
• Type E to enable the interface
• Once you have configured the LAN or WAN port for connectivity, select option P from
the Main Menu to Configure VoicePath
• Select V from the Voice Configuration Menu to Set Voice Gateway
• Select option 6 for SIP 1.0 from the Voice Gateway Selection menu
• Save the setting and press ESC until you reach the Main Menu
• Select R to Reset the System
• After the system finishes the reboot, login as Supervisor and select O from the Main
Menu to Manage SIP Embedded Client
• Type C to Configure SIP Parameters. Complete the settings accordingly:
o Register with Proxy: Yes
o Enter the DNS name or IP address for SIP Proxy: Type the domain
provided in the Proxy/Domain field on the Trunk Provisioning email received
from Enterprise Setup (ex. domain.com)
(22 Seiten)
(4 Seiten)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern